Basic specification:
710 (4×4)
Length 4175mm
Width 1760mm
Height 2045mm
Wheelbase 2200mm
Wheeltrack front & rear 1440mm
Ground Clearance 335mm
Load Length 2245mm
Load Width 1570mm
Vehicle Weight 1950-2100kg
Payload 1000kg
Axle Load Front 1500kg
Axle Load Rear 1550kg
Front & Rear Departure angle 45°
Fording Depth 700mm
Turning Circle 10.37m
Towing Capacity road 5000kg
Towing Capacity off-road1500kg
Climbing Ability 100%
Fuel Tank Capacity 75lt
Max. Speed 110kph
Min. Speed 3kph
Fuel Consumption 14.2ltr/100km
Engine
aircooled, 4-cyl., 4-stroke, inline petrol engine
Displacement 2499
Power 60-64 kw @ 4000RPM
Torque 180-184 Nm
Drivetrain
Fichtel & Sachs single-plate dry clutch hydraulically operated, 240mm diameter
Gearbox
ZF fully synchronized 5-speed
First: 5.33
Second: 3.24
Third: 2.04
Fourth: 1.30
Fifth: 1.00Reverse: 5.47
Transfer Case; ZF Fully synchronised 2-speed
Transfer Case Ratio
Low: 1.69
High: 0.88
Axle Drive Ratio
2.846 (13:37)
Spur Gear Ratio
2.266 (15:34)
Front Axle completely enclosed & sealed parallel joints
Suspension coil springs
Chassis; Torsion resistant central tube chassis with swing axles incorporating the transfer case and axle drives
Steering ZF-Gemmer worm and roller (5 turns lock to lock)
Drum Brakes, Dual circuit power assisted system Duplex-type front wheel brakes, Duo-servo rear wheel brakes
Hand Brake disc type with asymmetrical deep rims, acting on main drive-shaft.
Tyres BF Goodrich MT 235/85R16
For more info or to contact the seller:
